Some characteristics of disposable medical masks

Disposable medical masks, also known as medical surgical masks, are a necessary type of medical supplies. Its characteristic is that the outer layer uses non-woven fabric or other protective cloth with better waterproof performance, the middle layer uses melt-blown cloth or other filter materials with strong filtration performance, and the inner layer uses non-woven fabric with comfortable and better air permeability or other breathable materials. Material. Disposable medical masks are designed and produced according to medical needs with the characteristics of protection, filtration, breathability, and practicality. They are widely used in the medical field and are necessary safety protection products for medical staff in their daily work.

1. Good protective performance: The outer layer of disposable medical masks is usually made of non-woven fabrics or other protective fabrics with good waterproofness, which can effectively prevent respiratory fluids or other pollutants from entering the mouth.

2. High filtration efficiency: The middle layer of disposable medical masks is made of melt-blown cloth or other filter materials with strong filtration performance, which can effectively filter particles and other particulate matter.

3. Good permeability: The inner layer of disposable medical masks is usually made of non-woven fabric or other breathable materials, which has a high degree of comfort.

4. Reliable quality: The production of disposable medical masks must meet strict standards and requirements. The production process needs to undergo strict testing, and the production process also requires a high degree of rigor to ensure reliable product quality.

5. Strong practicability: The use process of disposable medical masks is simple, light and easy to carry, and convenient for routine nursing use.


Medical Disposable Flat Mask


The following are the production standards for disposable masks:

1. Material selection
The inner and outer layers are made of high-density non-woven fabric, and the middle layer is made of melt-blown fabric.

2. Design and size
Disposable masks are designed according to the size of the human face. The standard size is 17.5cm × 9.5cm. It is made of folded non-woven fabric, and the two sides are fixed by heat-pressing.

3. Filtration efficiency
Disposable masks should have a certain filtration efficiency and be able to filter particles. Generally, the filtration efficiency is required to be greater than 95%.

4. Structure and appearance
Disposable masks should meet the standards of compact structure and neat appearance, conform to ergonomics, and be able to protect the nose, mouth, chin and their surrounding parts.

5. Quality control
The production of disposable masks should be strictly operated in accordance with production standards. The production process requires strict requirements, and the quality requirements meet the corresponding standards. Only after passing the test can they leave the factory.

6. Production environment
The production environment of disposable masks should meet the clean room and hygienic standards, the production process should comply with the production standard operating procedures, and the production personnel should be trained and have basic protection knowledge.

The above are the production standards for disposable masks. In addition to the above indicators during the production process, it is also necessary to strictly abide by the production process and production standards to ensure that the produced disposable masks meet the production quality standards.